home *** CD-ROM | disk | FTP | other *** search
OS/2 Network Information File | 1996-02-24 | 1.2 KB | 42 lines |
- [NE2000MS]
- Type = NDIS
- Title = "Novell NE2000 Compatible (Microsoft)"
- Version = 2.0
- DriverName = MS2000$
- Xports = NETBEUI LANDD
-
- [FILE]
- Name = NE2000MS.OS2
- Path = IBMCOM\MACS
-
- [IOBASE]
- Display = "I/O Port Base Address Used"
- Type = HexNum
- Default = 340
- Range = 200-360
- Step = 20
- Optional = NO
- Editable = YES
- Virtual = NO
- Help = "Enter the base address used for the network adapter's
- I/O ports. Address 340 (the default) is recommended. This value
- must match the adapter's configuration, as set by switches or
- jumpers on the card, or by setup software supplied for the card. No
- other device in the system may use the same I/O port setting."
-
- [INTERRUPT]
- Display = "Interrupt (IRQ) Level Used"
- Type = Decimal
- Default = 10
- Range = 2-15
- Step = 1
- Optional = NO
- Editable = YES
- Virtual = NO
- Help = "Enter the interrupt (IRQ) used by the network adapter. IRQs 5,
- 10 (the default), and 11 are recommended. If using IRQ 2, enter 9,
- since IRQ 2 is redirected. This value must match the adapter's
- configuration, as set by switches or jumpers on the card, or by setup
- software supplied for the card. No other device in your system may use
- the same interrupt (IRQ)."